Designed by Dowse Engineering for ducted exhaust and extraction applications. The Cyclo Vertical range of exhaust fans use axial flow and centrifugal design to provide high pressure characteristic stable over a wide range of airflow. The design allows for lower RPM and subsequent lower energy and noise levels.
|Model No.||Fan Speed Rev/Min||K.W||Amps||Volts||Approx Noise Level @ 3mtr (dBA)||Motor Shaft mm||IP Rating|
* VARIABLE SPEED WITH A CYCLO VSS - Note: Requires 4 cable install from switch to fan motor
** TWO SPEED OPTION AVAILABLE ON REQUEST - Note: Requires 5 cable install from switch to fan motor
Typical Industries & Applications :
Hospitality | Commercial Kitchens, Food Trucks, Mobile Food Containers
Manufacturing | Welding, Powder Coating, Spray Painting, Glue Works, Fibre Glassing
Warehousing / Office | Ablution Block, Heat Extraction
Extraction of Heat, Toxic Gas and Hazardous Gas options
|Description||Vertical Exhaust Fan – Mobile Mount|
|Int. Flange Dia||380 mm|
|Fixing||Vertical, Roof Mounted|
|Features||High performing, robust and light weight
Locally owned and manufactured in Melbourne (Australia) since 1947
EPA Compliant, Australian & NZ Standards Compliant
|Impeller||Each impeller is individually designed and manufactured to precise specifications for maximum airflow at high pressure
Hand crafted and balanced
Mixed flow type impellers (axial flow and centrifugal design)
|Enclosure||Galvanized steel casing and waste resistant motor enclosures
Motor mounted outside airstream
Supplied with associated flanges
|Phase(s)||Single Phase Only|
|Custom Motors||Hazard Area Motors
– Ex ‘d’ Flame, Ex ‘e’ Increased Safety, Ex ‘n’ Non-Sparking, Dust Ignition Proof, Bush Fire Code Compliant
|Circuit Breaker||Separate Current rated circuit breaker (IEC/EN 60947 approved) must be installed between the motor and building power supply.
Circuit breaker overload should be set to suit motor’s amp draw.
|Control Option(s)||5A Variable Speed Switch (Available)
2 Speed Switch (N/A)
Cyclo VSD Plug-Ins (N/A)
(Plug ins available: Temperature sensor, CO2 sensor, Airflow / Pressure sensor, Smoke sensor)
|Weight||Approx. 30 kilograms|
|Installation||Fan Unit: Roof Plumber, Canopy Maintenance / Installer
Electrical Connections: Licensed electrician
|Transport||Top load only
Ensure impeller has not been exposed to wet weather.
Any water inside the motor housing can damage the motor.
* All performance curves are approximates * Please contact our consultants for accurate data.