Designed by Dowse Engineering for ducted supply, exhaust and extraction applications.
Designed with mixed flow aluminium alloy impellers that allow for maximum airflow at high pressure levels, the axial fans from Cyclo Fans is made in Australia and offers improved efficiency over vertical mounted fans. Thanks to its compact designed casing, this fan can handle a large volume of air and is able to provide high pressure characteristics over a variety of flows.
Available in galvanised or powder coated finishes, and with a number of colour options to choose from, the axial fan is made from stock components and is available on short delivery. It can also be provided with a single or three phase motors. Specialised motors for extra protection are available on request
To learn more about the fan, get in touch with Cyclo Fans today +61 3 9383 668.
|Model No.||Fan Speed Rev/Min||K.W||Amps||Volts||Approx Noise Level @ 3mtr (dBA)||Motor Shaft mm||IP Rating|
* VARIABLE SPEED WITH A CYCLO VSS - Note: Requires 4 cable install from switch to fan motor
** TWO SPEED OPTION AVAILABLE ON REQUEST - Note: Requires 5 cable install from switch to fan motor
Typical Industries & Applications :
Hospitality | Commercial Kitchens, Food Trucks, Mobile Food Containers
Manufacturing | Welding, Powder Coating, Spray Painting, Glue Works, Fibre Glassing
Warehousing / Office | Ablution Block, Heat Extraction
Extraction of Heat, Toxic Gas and Hazardous Gas options
|Description||Axial (In-line) Supply – Vertical Mount|
|Int. Flange Dia||300 mm|
|Fixing||Roof Mounted, In-line|
|Features||High performing, robust and light weight
Locally owned and manufactured in Melbourne (Australia) since 1947
EPA Compliant, Australian & NZ Standards Compliant
|Impeller||Each impeller is individually designed and manufactured to precise specifications for maximum airflow at high pressure
Hand crafted and balanced
Mixed flow type impellers (axial flow and centrifugal design)
|Enclosure||Galvanized steel casing and waste resistant motor enclosures
Motor mounted outside airstream
Quick release cowls
Supplied with associated flanges
|Motor||Typical Regal, Typical WEG|
|Phase(s)||Single Phase & Three Phase|
|Custom Motors||Hazard Area Motors
– Ex ‘d’ Flame, Ex ‘e’ Increased Safety, Ex ‘n’ Non-Sparking, Dust Ignition Proof, Bush Fire Code Compliant
|Circuit Breaker||Separate Current rated circuit breaker (IEC/EN 60947 approved) must be installed between the motor and building power supply.
Circuit breaker overload should be set to suit motor’s amp draw.
|Control Option(s)||5A Variable Speed Switch (Available)
2 Speed Switch (N/A)
Cyclo VSD (Available)
(Plug ins available: Temperature sensor, CO2 sensor, Airflow / Pressure sensor, Smoke sensor)
|Installation||Fan Unit: Roof Plumber, Canopy Maintenance / Installer
Electrical Connections: Licensed electrician
|Transport||Top load only
Ensure impeller has not been exposed to wet weather, water inside the motor housing can cause damage to the motor.
* All performance curves are approximates * Please contact our consultants for accurate data.