V25 VERTICAL DISCHARGE FAN

Specifically made for commercial kitchens, the V25 vertical fan features individually designed and manufactured impellers that provide maximum airflow at high pressure levels. The fan also complies with EPA requirements, including low pollution and vertical exhaust configuration.

With a weatherproof galvanised steel casing and an externally vented motor enclosure, the V25 vertical fan weighs approximately 15 kilograms and is Australian Standards Compliant. It also features aluminium alloy mixed flow impellers that allow for lower fan speeds and noise levels.

For more information about the V25 fan, contact Cyclo International today.

Performance Image

Technical Data

Model No. Fan Speed Rev/Min K.W Amps Volts Approx Noise Level @ 3mtr (dBA) Motor Shaft mm IP Rating
V25-184-SP 1400 0.18 1.35 240 53 13 55

Dimensions

Dimensions Image
A 530mm
B 360mm
C 90mm
D 22mm
E 260mm
F 310mm

Typical Industries & Applications :
Hospitality | Commercial Kitchens, Food Trucks, Mobile Food Containers
Manufacturing | Welding, Powder Coating, Spray Painting, Glue Works, Fibre Glassing
Warehousing / Office | Ablution Block, Heat Extraction
Extraction of Heat, Toxic Gas and Hazardous Gas options

Description Vertical Exhaust Fan
Model V25
Int. Flange Dia 260 mm
Fixing Vertical, Roof Mounted
Features High performing, robust and light weight
Locally owned and manufactured in Melbourne (Australia) since 1947
EPA Compliant, Australian & NZ Standards Compliant
Impeller Each impeller is individually designed and manufactured to precise specifications for maximum airflow at high pressure
Hand crafted and balanced
Aluminium alloy
Mixed flow type impellers (axial flow and centrifugal design)
Enclosure Galvanized steel casing and waste resistant motor enclosures
Motor mounted outside airstream
Quick release cowls
Supplied with associated flanges
Motor Typical Kulthorn Electric
Phase(s) Single Phase Only
Custom Motors Hazard Area Motors
– Ex ‘d’ Flame, Ex ‘e’ Increased Safety, Ex ‘n’ Non-Sparking, Dust Ignition Proof, Bush Fire Code Compliant
Circuit Breaker Separate Current rated circuit breaker (IEC/EN 60947 approved) must be installed between the motor and building power supply.
Circuit breaker overload should be set to suit motor’s amp draw.
Control Option(s) 5A Variable Speed Switch (Available)
2 Speed Switch (N/A)
Cyclo VSD Plug-Ins (N/A)
(Plug ins available: Temperature sensor, CO2 sensor, Airflow / Pressure sensor, Smoke sensor)
Weight Approx 17 Kilograms
Installation Fan Unit: Roof Plumber, Canopy Maintenance / Installer
Electrical Connections: Licensed electrician
Transport Top load only
Ensure impeller has not been exposed to wet weather.
Any water inside the motor housing can damage the motor.

 

* All performance curves are approximates * Please contact our consultants for accurate data.

Enquire Now

  

Related Product