V38

V38 VERTICAL EXHAUST FAN

Australian made, the V38 vertical exhaust fan from Cyclo is designed for use in demanding commercial kitchen environments. Manufactured specially to comply with EPA requirements for vertical exhaust configuration and low pollution, the fan features mixed flow impellers that are constructed from aluminium alloy for maximum airflow at high pressure levels.

The V38 vertical exhaust fan weighs approximately 35 to 40 kilograms and is Australian Standards Compliant. It’s also weatherproof, with a galvanised steel casing and an externally vented motor enclosure.

Technical Data

Model No.	Fan Speed Rev/Min	K.W	Amps	Volts	Approx Noise Level @ 3mtr (dBA)	Motor Shaft mm	IP Rating
V38-186-SP	920	0.18	1.20	240	45	16	44
V38-376-SP	920	0.37	2.50	240	50	16	44
V38-376-3P	920	0.37	1.16	415	50	19	55
V38-374-SP *	1400	0.37	2.30	240	60	16	44
V38-374-3P	1400	0.37	1.05	415	60	14	55
V38-554-SP **	1420	0.55	4.3	240	62	19	44
V38-554-3P	1420	0.55	1.14	415	62	19	55
V38-754-SP **	1450	0.75	4.3	240	64	16	44
V38-754-3P	1400	0.75	1.79	415	64	19	55

* - Variable Speed
** - Two Speed (On Request)

Dimensions

A	710mm
B	630mm
C	145mm
D	45mm
E	385mm
F	455mm

Typical Industries & Applications :
Hospitality | Commercial Kitchens, Food Trucks, Mobile Food Containers
Manufacturing | Welding, Powder Coating, Spray Painting, Glue Works, Fibre Glassing
Warehousing / Office | Ablution Block, Heat Extraction
Extraction of Heat, Toxic Gas and Hazardous Gas options

Description	Vertical Exhaust Fan
Model	V38
Int. Flange Dia	385 mm
Fixing	Vertical, Roof Mounted
Features	High performing, robust and light weight Locally owned and manufactured in Melbourne (Australia) since 1947 EPA Compliant, Australian & NZ Standards Compliant
Impeller	Each impeller is individually designed and manufactured to precise specifications for maximum airflow at high pressure Hand crafted and balanced Aluminium alloy Mixed flow type impellers (axial flow and centrifugal design)
Enclosure	Galvanized steel casing and waste resistant motor enclosures Motor mounted outside airstream Supplied with associated flanges
Motor	Typical CMG, Typical Weg
Phase(s)	Single Phase Only
Custom Motors	Hazard Area Motors – Ex ‘d’ Flame, Ex ‘e’ Increased Safety, Ex ‘n’ Non-Sparking, Dust Ignition Proof, Bush Fire Code Compliant
Circuit Breaker	Separate Current rated circuit breaker (IEC/EN 60947 approved) must be installed between the motor and building power supply. Circuit breaker overload should be set to suit motor’s amp draw.
Control Option(s)	5A Variable Speed Switch (Available) 2 Speed Switch (Available) Cyclo VSD Plug-Ins (Available) (Plug ins available: Temperature sensor, CO2 sensor, Airflow / Pressure sensor, Smoke sensor)
Weight	35 – 40kg
Installation	Fan Unit: Roof Plumber, Canopy Maintenance / Installer Electrical Connections: Licensed electrician
Transport	Top load only Ensure impeller has not been exposed to wet weather. Any water inside the motor housing can damage the motor.