SAV25

SAV25 – INLINE SUPPLY – VERTICAL MOUNT

Designed with mixed flow aluminium alloy impellers that allow for maximum airflow at high pressure levels, the axial fans from Cyclo is made in Australia and offers improved efficiency over vertical mounted fans. Thanks to its compact designed casing, this fan can handle a large volume of air and is able to provide high pressure characteristics over a variety of flows.

Available in galvanised or powder coated finishes, and with a number of colour options to choose from, the axial fan is made from stock components and is available on short delivery. It can also be provided with a single or three phase motors. Specialised motors for extra protection are available on request.

Technical Data

Model No.	Fan Speed Rev/Min	K.W	Amps	Volts	Approx Noise Level @ 3mtr (dBA)	Motor Shaft mm	IP Rating
SAV25	1400	0.18	1.4	240	52	12.7	44

Dimensions

A	300mm
B	240mm
C	260mm
D	30mm
E	300mm
F	TBC
G	TBC
H	TBC

Typical Industries & Applications :
Hospitality | Commercial Kitchens, Food Trucks, Mobile Food Containers
Manufacturing | Welding, Powder Coating, Spray Painting, Glue Works, Fibre Glassing
Warehousing / Office | Ablution Block, Heat Extraction
Extraction of Heat, Toxic Gas and Hazardous Gas options

Description	Axial (In-line) Supply – Vertical Mount
Model	SAV 25
Int. Flange Dia	260 mm
Fixing	Roof Mounted, In-line
Features	High performing, robust and light weight Locally owned and manufactured in Melbourne (Australia) since 1947 EPA Compliant, Australian & NZ Standards Compliant
Impeller	Each impeller is individually designed and manufactured to precise specifications for maximum airflow at high pressure Hand crafted and balanced Aluminium alloy Mixed flow type impellers (axial flow and centrifugal design)
Enclosure	Galvanized steel casing and waste resistant motor enclosures Motor mounted outside airstream Supplied with associated flanges
Motor	Typical Regal
Phase(s)	Single Phase Only
Custom Motors	Hazard Area Motors – Ex ‘d’ Flame, Ex ‘e’ Increased Safety, Ex ‘n’ Non-Sparking, Dust Ignition Proof, Bush Fire Code Compliant
Circuit Breaker	Separate Current rated circuit breaker (IEC/EN 60947 approved) must be installed between the motor and building power supply. Circuit breaker overload should be set to suit motor’s amp draw.
Control Option(s)	5A Variable Speed Switch (N/A)
Weight	10kg
Installation	Fan Unit: Roof Plumber, Canopy Maintenance / Installer Electrical Connections: Licensed electrician
Transport	Top load only Ensure impeller has not been exposed to wet weather. Water inside the motor housing can cause damage to the motor.