CAV46
- Home
- Fans
- Food Truck / Van
- CAV46
CAV 46 VERTICAL DISCHARGE FAN – MOBILE MOUNT
Designed by Dowse Engineering for ducted exhaust and extraction applications. The Cyclo Vertical range of exhaust fans use axial flow and centrifugal design to provide high pressure characteristic stable over a wide range of airflow. The design allows for lower RPM and subsequent lower energy and noise levels.
Technical Data
| Model No. | Fan Speed Rev/Min | K.W | Amps | Volts | Approx Noise Level @ 3mtr (dBA) | Motor Shaft mm | IP Rating |
| CAV46-376-SP | 900 | 0.37 | 2.50 | 240 | 53 | 16 | 44 |
| CAV46-376-3P | 900 | 0.37 | 1.26 | 415 | 53 | 19 | 55 |
| CAV46-374-SP* | 1400 | 0.37 | 2.30 | 240 | 63 | 16 | 44 |
| CAV46-374-3P | 1400 | 0.37 | 1.05 | 415 | 63 | 14 | 55 |
| CAV46-556-3P | 900 | 0.55 | 1.70 | 415 | 54 | 19 | 55 |
| CAV46-554-SP** | 1400 | 0.55-0.75 | 4.30 | 240 | 64 | 16 | 44 |
| CAV46-554-3P | 1400 | 0.55 | 1.37 | 415 | 64 | 19 | 55 |
| CAV46-756-3P | 900 | 0.75 | 1.92 | 415 | 55 | 24 | 55 |
| CAV46-754-SP** | 1400 | 0.75 | 4.30 | 240 | 66 | 16 | 44 |
| CAV46-754-3P | 1400 | 0.75 | 1.61 | 415 | 66 | 19 | 55 |
| CAV46-114-3P | 1400 | 1.1 | 2.37 | 415 | 70 | 24 | 55 |
| CAV46-154-3P | 1400 | 1.5 | 3.13 | 415 | 72 | 24 | 55 |
* VARIABLE SPEED WITH A CYCLO VSS - Note: Requires 4 cable install from switch to fan motor
** TWO SPEED OPTION AVAILABLE ON REQUEST - Note: Requires 5 cable install from switch to fan motor
Dimensions
| A | 850 mm |
| B | TBA |
| C | TBA |
| D | TBA |
| E | 465 mm |
| F | 525 mm |
Typical Industries & Applications :
Hospitality | Commercial Kitchens, Food Trucks, Mobile Food Containers
Manufacturing | Welding, Powder Coating, Spray Painting, Glue Works, Fibre Glassing
Warehousing / Office | Ablution Block, Heat Extraction
Extraction of Heat, Toxic Gas and Hazardous Gas options
| Description | Vertical Exhaust Fan – Mobile Mount |
| Model | CAV 46 |
| Int. Flange Dia | 460 mm |
| Fixing | Vertical, Roof Mounted |
| Features | High performing, robust and light weight Locally owned and manufactured in Melbourne (Australia) since 1947 EPA Compliant, Australian & NZ Standards Compliant |
| Impeller | Each impeller is individually designed and manufactured to precise specifications for maximum airflow at high pressure Hand crafted and balanced Aluminium alloy Mixed flow type impellers (axial flow and centrifugal design) |
| Enclosure | Galvanized steel casing and waste resistant motor enclosures Motor mounted outside airstream Supplied with associated flanges |
| Motor | Typical Kulthorn Electric |
| Phase(s) | Single Phase Only |
| Custom Motors | Hazard Area Motors – Ex ‘d’ Flame, Ex ‘e’ Increased Safety, Ex ‘n’ Non-Sparking, Dust Ignition Proof, Bush Fire Code Compliant |
| Circuit Breaker | Separate Current rated circuit breaker (IEC/EN 60947 approved) must be installed between the motor and building power supply. Circuit breaker overload should be set to suit motor’s amp draw. |
| Control Option(s) | 5A Variable Speed Switch (Available) 2 Speed Switch (N/A) Cyclo VSD Plug-Ins (N/A) (Plug ins available: Temperature sensor, CO2 sensor, Airflow / Pressure sensor, Smoke sensor) |
| Weight | TBA |
| Installation | Fan Unit: Roof Plumber, Canopy Maintenance / Installer Electrical Connections: Licensed electrician |
| Transport | Top load only Ensure impeller has not been exposed to wet weather. Any water inside the motor housing can damage the motor. |
* All performance curves are approximates * Please contact our consultants for accurate data.
